#
# VPN接続先との通信 (YMS-VPN8ソフトウェアライセンス版 ＋ RADIUSサーバーによるユーザー認証) : コマンド設定
#

#
# 本社 ルーター
#

#
# ゲートウェイの設定
#
ip route default gateway pp 1

#
# LANインターフェースの設定
#
ip lan1 address 192.168.100.1/24
ip lan1 proxyarp on

#
# WANインターフェースの設定
#
pp select 1
 pp always-on on
 pppoe use lan2
 pp auth accept pap chap
 pp auth myname (ISPに接続するID) (ISPに接続するパスワード)
 ppp lcp mru on 1454
 ppp ipcp msext on
 ppp ccp type none
 ip pp address (固定グローバルIPアドレス)
 ip pp mtu 1454
 ip pp secure filter in 1020 1030 1040 1041 1042 2000
 ip pp secure filter out 1010 1011 1012 1013 1014 1015 3000 dynamic 100 101 102 103 104 105 106 107
 ip pp nat descriptor 1
 pp enable 1

#
# L2TP接続を受け入れるための設定
#
pp select anonymous
 pp bind tunnel1-tunnel3
 pp auth request pap
 ppp ipcp ipaddress on
 ppp ipcp msext on
 ip pp remote address pool 192.168.100.200-192.168.100.210
 ip pp mtu 1258
 pp enable anonymous
l2tp service on

#
# L2TP接続で使用するトンネル1の設定
#
tunnel select 1
 tunnel encapsulation l2tp
 ipsec tunnel 101
  ipsec sa policy 101 1 esp aes-cbc sha-hmac
  ipsec ike keepalive use 1 off
  ipsec ike local address 1 192.168.100.1
  ipsec ike nat-traversal 1 on
  ipsec ike pre-shared-key 1 text (事前共有鍵)
  ipsec ike remote address 1 any
 l2tp tunnel disconnect time off
 l2tp keepalive use on 10 3
 l2tp keepalive log on
 l2tp syslog on
 ip tunnel tcp mss limit auto
 tunnel enable 1

#
# L2TP接続で使用するトンネル2の設定
#
tunnel select 2
 tunnel encapsulation l2tp
 ipsec tunnel 102
  ipsec sa policy 102 2 esp aes-cbc sha-hmac
  ipsec ike keepalive use 2 off
  ipsec ike local address 2 192.168.100.1
  ipsec ike nat-traversal 2 on
  ipsec ike pre-shared-key 2 text (事前共有鍵)
  ipsec ike remote address 2 any
 l2tp tunnel disconnect time off
 l2tp keepalive use on 10 3
 l2tp keepalive log on
 l2tp syslog on
 ip tunnel tcp mss limit auto
 tunnel enable 2

#
# L2TP接続で使用するトンネル3の設定
#
tunnel select 3
 tunnel encapsulation l2tp
 ipsec tunnel 103
  ipsec sa policy 103 3 esp aes-cbc sha-hmac
  ipsec ike keepalive use 3 off
  ipsec ike local address 3 192.168.100.1
  ipsec ike nat-traversal 3 on
  ipsec ike pre-shared-key 3 text (事前共有鍵)
  ipsec ike remote address 3 any
 l2tp tunnel disconnect time off
 l2tp keepalive use on 10 3
 l2tp keepalive log on
 l2tp syslog on
 ip tunnel tcp mss limit auto
 tunnel enable 3

#
# IPsecのトランスポートモード設定
#
ipsec transport 1 101 udp 1701
ipsec transport 2 102 udp 1701
ipsec transport 3 103 udp 1701
ipsec auto refresh on

#
# フィルターの設定
#
ip filter source-route on
ip filter directed-broadcast on
ip filter 1010 reject * * udp,tcp 135 *
ip filter 1011 reject * * udp,tcp * 135
ip filter 1012 reject * * udp,tcp netbios_ns-netbios_ssn *
ip filter 1013 reject * * udp,tcp * netbios_ns-netbios_ssn
ip filter 1014 reject * * udp,tcp 445 *
ip filter 1015 reject * * udp,tcp * 445
ip filter 1020 reject 192.168.100.0/24 *
ip filter 1030 pass * 192.168.100.0/24 icmp
ip filter 1040 pass * 192.168.100.1 udp * 500
ip filter 1041 pass * 192.168.100.1 udp * 4500
ip filter 1042 pass * 192.168.100.1 esp
ip filter 2000 reject * *
ip filter 3000 pass * *
ip filter dynamic 100 * * ftp
ip filter dynamic 101 * * www
ip filter dynamic 102 * * domain
ip filter dynamic 103 * * smtp
ip filter dynamic 104 * * pop3
ip filter dynamic 105 * * submission
ip filter dynamic 106 * * tcp
ip filter dynamic 107 * * udp

#
# NATの設定
#
nat descriptor type 1 masquerade
nat descriptor masquerade static 1 1 192.168.100.1 esp
nat descriptor masquerade static 1 2 192.168.100.1 udp 500
nat descriptor masquerade static 1 3 192.168.100.1 udp 4500

#
# RADIUSサーバーの設定
#
radius auth on
radius auth port 1812
radius server (192.168.100.240)
radius secret (RADIUSシークレット)

#
# DHCPの設定
#
dhcp scope 1 192.168.100.2-192.168.100.191/24
dhcp server rfc2131 compliant except remain-silent
dhcp service server

#
# DNSの設定
#
dns server (ISPから指定されたDNSサーバーのIPアドレス)
dns private address spoof on