#
# 無線LANアクセスポイントをDHCPサーバーとして利用 : Web GUI設定
#

#
# WLX313(2)
#

vlan-port-mode lan1:1 hybrid
vlan-id 1 1
vlan-access lan1:1 1
ip vlan-id 1 address dhcp
ip route default gateway dhcp
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
 airlink beacon dtim-period 1
 airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink channel range 36 52
 airlink channel range dfs 36
 airlink beacon dtim-period 1
 airlink enable module2
airlink select module3
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink channel range 100 116
 airlink channel range dfs 36
 airlink beacon dtim-period 1
 airlink enable module3
airlink select 1
 airlink ssid (SSID)
 airlink dhcp on
 airlink vlan-id 1
 airlink bind module1 module2 module3
 airlink auth wpa2-psk aes
 airlink psk-key (事前共有鍵)
 airlink stealth on
 airlink enable 1
dhcp service relay
dhcp relay server 192.168.100.240
dns server dhcp
schedule at 1 startup * ntpdate ntp.nict.jp syslog
schedule at 2 startup airlink module1 airlink channel change station-none wait-time=5
schedule at 3 startup airlink module2 airlink channel change station-none wait-time=120
schedule at 4 startup airlink module3 airlink channel change station-none wait-time=120
wlan-controller host ip address 192.168.100.240
wlan-controller host (WLX313(1)のMACアドレス)