#
# 部門ごとに無線ネットワークを分割 : ルーター + 無線LANアクセスポイント Web GUI設定
#

#
# WLX202
#


administrator password encrypted (管理パスワード)
vlan-port-mode lan1:1 hybrid
vlan-id 1 1
vlan-id 2 101
vlan-id 102 102
vlan-access lan1:1 1
vlan-trunk lan1:1 2 join
vlan-trunk lan1:1 102 join
ip vlan-id 1 address dhcp
ip route default gateway dhcp
airlink select module1
 airlink mode 11b+g+n 
 airlink channel auto bandwidth=40 primary=lower 
 airlink beacon dtim-period 1
 airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink beacon dtim-period 1
 airlink enable module2
airlink select 1
 airlink ssid (部門AのSSID名)
 airlink vlan-id 101 
 airlink bind module1 module2
 airlink auth wpa2-eap aes
 airlink radius auth on
 airlink radius server 127.0.0.1
 airlink stealth on
 airlink enable 1
airlink select 2
 airlink ssid (部門BのSSID名)
 airlink vlan-id 102 
 airlink bind module1 module2
 airlink auth wpa2-eap aes
 airlink radius auth on
 airlink radius server 127.0.0.1
 airlink stealth on
 airlink enable 2
dns server dhcp
radiusd use on
radiusd reauth interval 43200
radiusd user (部門AのユーザーID) (部門Aのパスワード) ssid=(部門AのSSID名)
radiusd user (部門BのユーザーID) (部門Bのパスワード) ssid=(部門BのSSID名)
schedule at 1 startup * ntpdate ntp.nict.jp syslog