#
# WPA2/WPA3 パーソナルを使用した無線ネットワークを設定 : ルーター コマンド設定 + 無線LANアクセスポイント Web GUI設定
#

#
# WLX402
#

vlan-port-mode lan1:1 hybrid
vlan-id 1 1
vlan-access lan1:1 1
ip vlan-id 1 address 192.168.100.240/24
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
 airlink channel range 1 6
 airlink transmit power level 1
 airlink max client 10
airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink channel range 36 52 100 116
 airlink channel range dfs 36 52 100 116
 airlink transmit power level 1
 airlink max client 10
airlink enable module2
airlink select 1
 airlink ssid (SSID)
 airlink vlan-id 1
 airlink bind module1 module2
 airlink auth wpa2-psk aes
 airlink psk-key (事前共有鍵)
airlink enable 1
certificate generate ca "WLX402 RADIUS"
schedule at 1 startup * ntpdate ntp.nict.jp syslog
schedule at 2 startup airlink module1 airlink channel change station-none exclude=none wait-time=5
schedule at 3 startup airlink module2 airlink channel change station-none exclude=none
wlan-controller role controller-ap
wlan-controller bind vlan auto
wlan-controller select 1
 airlink select module1
  airlink mode 11b+g+n
  airlink channel auto bandwidth=40 primary=lower
  airlink channel range 1 6
  airlink transmit power level 1
  airlink max client 10
 airlink enable module1
 airlink select module2
  airlink mode 11a+n+ac
  airlink channel auto bandwidth=80 primary=lower primary40=lower
  airlink channel range 36 52 100 116
  airlink channel range dfs 36 52 100 116
  airlink transmit power level 1
  airlink max client 10
 airlink enable module2
 airlink select 1
  airlink ssid (SSID)
  airlink vlan-id 1
  airlink bind module1 module2
  airlink auth wpa2-psk aes
  airlink psk-key (事前共有鍵)
 airlink enable 1
wlan-controller select 1 1
 wlan-controller member-ap (WLX402のMACアドレス)