# # WPA2エンタープライズを使用した無線ネットワークを設定(EAP-TLS / RADIUSサーバー機能) : ルーター コマンド設定 + 無線LANアクセスポイント Web GUI設定 # # # WLX402 (Rev.17.00.10以前) # ip route default gateway 192.168.100.1 vlan-port-mode lan1:1 hybrid vlan-port-mode lan1:2 trunk vlan-id 1 1 vlan-access lan1:1 1 ip vlan-id 1 address 192.168.100.240/24 airlink select module1 airlink mode 11b+g+n airlink channel auto bandwidth=40 primary=lower airlink channel range 1 6 airlink transmit power level 1 airlink max client 10 airlink enable module1 airlink select module2 airlink mode 11a+n+ac airlink channel auto bandwidth=80 primary=lower primary40=lower airlink channel range 36 52 100 116 airlink channel range dfs 36 52 100 116 airlink transmit power level 1 airlink max client 10 airlink enable module2 airlink select 1 airlink ssid (SSID) airlink vlan-id 1 airlink bind module1 module2 airlink auth wpa2-eap aes airlink radius auth on airlink radius account off airlink radius server 127.0.0.1 airlink enable 1 dns server 192.168.100.1 certificate generate ca "WLX402 RADIUS" radiusd use on radiusd user (ユーザーID) (パスワード) auth=eap-tls schedule at 1 startup * ntpdate ntp.nict.jp syslog schedule at 2 */* 00:00 * ntpdate ntp.nict.jp syslog schedule at 3 startup airlink module1 airlink channel change station-none exclude=none wait-time=5 schedule at 4 startup airlink module2 airlink channel change station-none exclude=none wlan-controller role controller-ap wlan-controller bind vlan auto wlan-controller select 1 airlink select module1 airlink mode 11b+g+n airlink channel auto bandwidth=40 primary=lower airlink channel range 1 6 airlink transmit power level 1 airlink max client 10 airlink enable module1 airlink select module2 airlink mode 11a+n+ac airlink channel auto bandwidth=80 primary=lower primary40=lower airlink channel range 36 52 100 116 airlink channel range dfs 36 52 100 116 airlink transmit power level 1 airlink max client 10 airlink enable module2 airlink select 1 airlink ssid (SSID) airlink vlan-id 1 airlink bind module1 module2 airlink auth wpa2-eap aes airlink radius auth on airlink radius account off airlink radius server 127.0.0.1 airlink enable 1 wlan-controller select 1 1 wlan-controller member-ap (WLX402のMACアドレス)