#
# WPA2エンタープライズを使用した無線ネットワークを設定(EAP-PEAP / 簡易RADIUSサーバー機能) : ルーター コマンド設定 + 無線LANアクセスポイント Web GUI設定
#

#
# WLX212
#

vlan-port-mode lan1:1 hybrid
vlan-id 1 1
vlan-access lan1:1 1
ip vlan-id 1 address dhcp
ip route default gateway dhcp
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
 airlink beacon dtim-period 1
 airlink max client 10
 airlink transmit power level 1
 airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink beacon dtim-period 1
 airlink max client 10
 airlink transmit power level 1
 airlink enable module2
airlink select 1
 airlink ssid (SSID)
 airlink vlan-id 1
 airlink bind module1 module2
 airlink auth wpa2-eap aes
 airlink radius auth on
 airlink radius server 127.0.0.1
 airlink stealth on
 airlink enable 1
dns server dhcp
radiusd use on
radiusd reauth interval 43200
radiusd user (ユーザーID) (パスワード) macaddress=(認証する無線端末のMACアドレス) auth=peap
schedule at 1 startup * ntpdate ntp.nict.jp syslog
wlan-controller select 1
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
 airlink beacon dtim-period 1
 airlink max client 10
 airlink transmit power level 1
 airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink beacon dtim-period 1
 airlink max client 10
 airlink transmit power level 1
 airlink enable module2
airlink select 1
 airlink ssid (SSID)
 airlink vlan-id 1
 airlink bind module1 module2
 airlink auth wpa2-eap aes
 airlink radius auth on
 airlink radius server 127.0.0.1
 airlink stealth on
 airlink enable 1
wlan-controller select 1 1
 wlan-controller member-ap (WLX212のMACアドレス)
 wlan-controller system name WLX212_(WLX212のシリアル番号)
 wlan-controller ip address dhcp
cluster virtual-ip address dhcp