#
# 夜間に無線LANの提供を止める : WLX402 Web GUI設定
#

#
# WLX402(3)
#

system name (WLX402(3)の名称)
vlan-port-mode lan1:1 hybrid
vlan-port-mode lan1:2 trunk
vlan-id 1 1
vlan-access lan1:1 1
ip vlan-id 1 address 192.168.100.243/24
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
airlink enable module2
airlink select 1
 airlink ssid (SSID)
 airlink vlan-id 1
 airlink bind module1 module2
 airlink auth wpa2-psk aes
 airlink psk-key (事前共有鍵)
 airlink stealth on
airlink enable 1
radiusd use off
schedule at 1 startup * ntpdate ntp.nict.jp syslog
schedule at 2 */* 00:00 * ntpdate ntp.nict.jp syslog
schedule at 3 */* 20:00 * wlan-controller config set 1 config=1
schedule at 4 */* 08:00 * wlan-controller config set 1
schedule at 5 startup airlink module1 airlink channel change station-none exclude=none wait-time=15
schedule at 6 startup airlink module2 airlink channel change station-none exclude=none wait-time=240
wlan-controller host (WLX402(1)のMACアドレス) (WLX402(2)のMACアドレス)
wlan-controller host ip address 192.168.100.241
wlan-controller bind vlan auto