#
# 無線LANコントローラー機能を使用してアクセスポイントを管理 : 無線LANアクセスポイント Web GUI設定
#

#
# WLX402(2) (Rev.17.00.12以降)
#

system name (WLX402(2)の名称)
vlan-port-mode lan1:1 hybrid
vlan-port-mode lan1:2 trunk
vlan-id 1 1
vlan-access lan1:1 1
ip vlan-id 1 address 192.168.100.242/24
airlink select module1
 airlink mode 11b+g+n
 airlink channel auto bandwidth=40 primary=lower
airlink enable module1
airlink select module2
 airlink mode 11a+n+ac
 airlink channel auto bandwidth=80 primary=lower primary40=lower
airlink enable module2
airlink select 1
 airlink ssid (SSID)
 airlink vlan-id 1
 airlink bind module1 module2
 airlink auth wpa2-psk aes
 airlink psk-key (事前共有鍵)
 airlink stealth on
airlink enable 1
certificate generate ca "WLX402 RADIUS"
radiusd use off
radiusd client auto auth on secret=(シークレット文字列)
schedule at 1 startup * ntpdate ntp.nict.jp syslog
schedule at 2 startup airlink module1 airlink channel change station-none exclude=none wait-time=10
schedule at 3 startup airlink module2 airlink channel change station-none exclude=none wait-time=120
wlan-controller host (WLX402(1)のMACアドレス) (WLX402(2)のMACアドレス)
wlan-controller host ip address 192.168.100.241
wlan-controller radiusd synchronization on
wlan-controller bind vlan auto
wlan-controller auto-switch sub-controller use on
wlan-controller select 1
 wlan-controller name "グループ 1"
 wlan-controller config model wlx313
 airlink select module1
  airlink mode 11b+g+n
  airlink channel auto bandwidth=40 primary=lower
 airlink enable module1
 airlink select module2
  airlink mode 11a+n+ac
  airlink channel auto bandwidth=80 primary=lower primary40=lower
 airlink enable module2
 airlink select 1
  airlink ssid (SSID)
  airlink vlan-id 1
  airlink bind module1 module2
  airlink auth wpa2-psk aes
  airlink psk-key (事前共有鍵)
  airlink stealth on
 airlink enable 1
wlan-controller select 1 3
 wlan-controller model name WLX402
 wlan-controller member-ap (WLX402(3)のMACアドレス)
 wlan-controller system name (WLX402(3)の名称)
 wlan-controller ip address 192.168.100.243/24